SOLARLOK PV4-S CONNECTOR 1500V DC Pin Connector

SOLARLOK PV4-S CONNECTOR 1500V DC Pin Connector 2270024-1

$2.50

Description

The SOLARLOK PV4-S connector is an upgrade of the industry leading
SOLARLOK PV4 connector to meet a minimum 1500V rating with
IP68 protection. The SOLARLOK PV4-S connector has been tested to
assure reliable and safe connections of solar arrays. The connectors
use industry standard crimp tooling that is readily available and used
by installers today.

Applications

  • Solar panels
  • Inverters
  • Micro inverters
  • DC optimizers

Benefits

  • Provides waterproof protection and is rated IP68 (1 m / 24 hours)
  • Minimizes power loss by providing low contact resistance

Electrical

  • UL 15 A and TV 30 A: 2.5 mm2 / 14 AWG (at 85 C)
  • UL 20 A and TV 40 A: 4.0 mm2 / 12 AWG (at 85 C)
  • UL 30 A and TV 45 A: 6.0 mm2 / 10 AWG (at 85 C)

Mechanical

  • 63mm x 24.5mm (Male)
  • 59.5mm x 18.7mm (Female)
  • Protection Degree: IP68 (1m / 24 hours)

Standards

  • 1000V DC / 1500V DC UL approved – UL6703
  • 1000V DC / 1500V DC TUV approved – IEC62852

Product Information

Part Number

2270024-1

Rated impulse voltage
Protection degree
AWG
Positive Connector (#8 AWG)
Pairs
Part Number (female)
Part Number (male)
Pollution Degree
Positive Connector (#10 AWG)
Part Numbers
Power Dissipation
Overlap
Protection class
Put-Up Length
Range of Cable Gland
Rate Current
Rated current
Orientation
Contact resistance
Temperature Rating
Regulatory Approvals (600V/1000V)
Overall Length
Negative Connector (#8 AWG)
Max Cable Tie Width
Max Wire Diameter
Max. Interrupting Rating
Maximum Support Interval
Maximum wire size
Mounting Hardware:
Negative Connector (#10 AWG)
Nominal OD
Overvoltage category/Pollution degree
Outside Diameter
Nominal Size
Number of Wires
Ohms
Operating Temperature
Operating Temperature Range
Order Number
SCCR Rating
Outer Color
Staubli / Multi-Contact Order #
Rated voltage
Wall Thickness
Type of Connector / Socket
Type of termination
Typical Contract Resistance
UL
UL Listing
UV rating
Voltage
Time Constant
AWG Size
Warranty
Weight per Foot
Width
Wiley Catalog Number
Wire Color
Wire Diameter
Wire Size Range
Hardware
Voltage rating
Wire Type
Stranding
Strap Length
Shield 1 type
Shield 2 type
Size of Cables
Special Feature:
Standard
Standards
Staubli / Multi-Contact Type
SCCR Rating 20
Terminal Block Internal Bus
Type
System voltage Max.
TUV
TV Rheinland
Technical Drawing
Temperature
Temperature range
Safety Class
Test voltage
NEC
Terminal Block
Application degree
Cross-section
Color
Color (Select Color)
Conductor size
Conductor type
Conductors
Connector Type (#10 AWG)
Connector Type (#8 AWG)
Electrical Connections
Contact material
Certifications
Current Withstand Rating
DC Voltage Ratings
Degree of protection:
Degree of protection mated
Diameter
Din Rai
Drill Out
Material:
Catalog Number:
Environmental
Certification
Article Designation
Acceptable Conduit Sizes
Ace Configuration
Ambient temperature range
Amp Rating
Ampacity
Amperage Rating
Approvals
Article Number
Clamping range in mm
Certificate No.
Assembled:
Brochure
CSA
Cable Diameter
Cap and Tray Quantity (8 Ft Lengths)
Capacitance
Manufacturer
Catalog Numbe
Max Bundle Diameter
Material Dimensions
Internal Wiring
Equipment Ground Conductor Type
Interrupting Rating
Inner Colors
Input Wire Diameter Range
Installation
Installation Manual
Insulation
Insulation material
Local Order Number
Frame Thickness
Item Number:
Fire Resistance
Jacket type
LAAP Article Number
LAPP Article Number
Length / Width / Height:
Length / Width / Height (In.)
Listing
Insulation Resistance
Equipment Ground Conductor Diameter Range
Locking system(UL)
Hole Size In. [mm]:
Heyco Part Numbers
Heyco Part Number
First Solar Series 6 Datasheet
Flame class
Flame retardant grade
Flammability Class
Flammability Classification
Flammability Rating
Fuse Amp Rating
IP Rating
Fuse Ampere Rating
Fuse Combiner Bus
Fuse Holder
Fuse Type
Global Part Name
Grounding
Grounding Terminal
Guage
Materials

Housing: PPE & PS Contact: Tinned copper

Technical Documents

Spec Sheet Download