TE Connectivity (Tyco) Solarlok PV4 Crimp Tool

TE Connectivity (Tyco) Solarlok PV4 Crimp Tool

$300.00

Description

The Solarlok PV4 crimp hand tool has been especially designed to apply Solarlok PV4 socket and pin contacts with open crimp sleeves. Wire sizes 4 and 6 mm as well as AWG12 and AWG 10 can be applied with this crimp hand tool.

Following Solarlok PV4 contacts can be applied:

  • Pin contact PN 1971857 ( 4/6 mm and AWG12/AWG10 )
  • Socket contact PN 1971858 ( 4/6 mm and AWG12/AWG10 )

The crimp hand tool is only to be used for the contacts listed above. The contacts may only be used in combination with Solar-Wire approved by TE Connectivity.

Product Information

Part Number

6-1579014-8
Overall Length
Positive Connector (#10 AWG)
Overvoltage category/Pollution degree
Pairs
Part Number (female)
Part Number (male)
Part Numbers
Pollution Degree
Overlap
Positive Connector (#8 AWG)
Power Dissipation
Protection class
Protection degree
Put-Up Length
Range of Cable Gland
Rate Current
Rated current
Rated impulse voltage
AWG
Rated voltage
SCCR Rating
Regulatory Approvals (600V/1000V)
Max Bundle Diameter
Max Cable Tie Width
Max Wire Diameter
Max. Interrupting Rating
Maximum Support Interval
Maximum wire size
Mounting Hardware:
Negative Connector (#8 AWG)
Outer Color
Outside Diameter
Nominal OD
Nominal Size
Number of Wires
Ohms
Operating Temperature
Operating Temperature Range
Order Number
Negative Connector (#10 AWG)
Orientation
Temperature Rating
Hardware
Wall Thickness
Voltage rating
Type
Type of Connector / Socket
Type of termination
Typical Contract Resistance
UL
UL Listing
UV rating
Wire Type
AWG Size
Test voltage
Warranty
Weight per Foot
Width
Wiley Catalog Number
Wire Color
Wire Diameter
Wire Size Range
Voltage
Time Constant
Staubli / Multi-Contact Order #
Stranding
Staubli / Multi-Contact Type
Safety Class
Shield 1 type
Shield 2 type
Size of Cables
Special Feature:
Standard
Standards
Terminal Block Internal Bus
SCCR Rating 20
Terminal Block
Strap Length
System voltage Max.
TUV
TV Rheinland
Technical Drawing
Temperature
Temperature range
NEC
Materials
Approvals
Certifications
Color
Color (Select Color)
Conductor size
Conductor type
Conductors
Connector Type (#10 AWG)
Connector Type (#8 AWG)
Clamping range in mm
Contact resistance
Cross-section
Current Withstand Rating
DC Voltage Ratings
Degree of protection:
Degree of protection mated
Diameter
Din Rai
Drill Out
Contact material
Electrical Connections
Equipment Ground Conductor Diameter Range
Environmental
Acceptable Conduit Sizes
Ace Configuration
Ambient temperature range
Amp Rating
Ampacity
Amperage Rating
Application degree
Article Number
Certificate No.
Certification
Assembled:
Brochure
CSA
Cable Diameter
Cap and Tray Quantity (8 Ft Lengths)
Capacitance
Catalog Numbe
Article Designation
Catalog Number:
Material Dimensions
Material:
Item Number:
Interrupting Rating
Inner Colors
Input Wire Diameter Range
Installation
Installation Manual
Insulation
Insulation material
Insulation Resistance
Locking system(UL)
Manufacturer
Hole Size In. [mm]:
Jacket type
LAAP Article Number
LAPP Article Number
Length / Width / Height:
Length / Width / Height (In.)
Listing
Local Order Number
Internal Wiring
IP Rating
Frame Thickness
Fuse Amp Rating
Heyco Part Number
Fire Resistance
First Solar Series 6 Datasheet
Flame class
Flame retardant grade
Flammability Class
Flammability Classification
Flammability Rating
Heyco Part Numbers
Equipment Ground Conductor Type
Fuse Ampere Rating
Fuse Combiner Bus
Fuse Holder
Fuse Type
Global Part Name
Grounding
Grounding Terminal
Guage

Technical Documents

Spec Sheet Download